Stability Room Features & Options
Environmental Walk-In Room Features
Listed below are the standard features that are available
on Walk-In chambers.
Cabinet Features
Safety Release Latches are standard on all CSZ Walk-In Chambers
to prevent a user from being trapped inside the chamber.
Stainless Steel Interior
All liners are constructed from Type 304 brushed stainless
steel that is easy to clean. All seams are continuously heliarc
welded to form a hermetically sealed unit to prevent moisture
migration.
Chamber Exterior
White embossed aluminum exterior. Other exterior
options are available.
Fog-Free Viewing Window
A multi-pane, heated window prevents condensation and allows
for product viewing.
Vapor Proof Lights
Two interior lights illuminates chamber workspace
and product. Vapor proof lights prevent moisture from penetrating
the light fixture.
Instrumentation Features
 |
Touch
Screen Controller
The CSZ EZT-560i Touch Screen Controller includes unlimited
profiling each with 99 steps, looping, product monitor,
and data storage. |
Refrigeration Features
Refrigeration Pressure Gauges
Allows operating pressures to be continuously monitored and
provides early warning indicators in the event of a leak.
Zero Ozone Depletion Refrigerants
CSZ chambers utilize refrigerants which are environmentally
safe, non-flammable, non-explosive and have a Zero Ozone Depletion
Potential (ODP).
Humidity Features
Humidity Demineralizer Water Filter System
Demineralizer removes water impurities and minerals that can
harm your chamber. Cartridges will turn orange-brown when
used and are easily replaceable.
Electronic Humidity Sensor
CSZ uses an electronic, solid state humidity sensor on all
of their humidity chambers. These sensors are highly reliable,
accurate, and require minimal maintenance compared to the
old wet wick humidity system that requires a lot of maintenance.
Environmental Walk-In Room Optional Accessories
Listed below are the options that are available on Walk-In
chambers.
Cabinet Options
Additional Access Ports
Additional circular, square, or rectangular ports are available
in a variety of sizes. Ports may be placed on both sides of
the chamber for ease of cable routing.
Shelves
Stainless steel wire racks are available.
Entry Ramp
Entry ramps with diamond trend plate floor are available
for easy loading of test items.
Oversize/Additional Doors
Oversize doors are available to for large test items
and full vehicle testing.
Reinforced Floor
Heavy gauge floor with optional diamond trend plate
is available for large loads.
Instrumentation Options
Windows-Based Software Package
CSZ EZ-Viewsoftware is available for monitoring and controlling
up to 20 chambers from any location.
Redundant Temperature Limit & Alarm
Provides essential failsafe over/under (hi/low) temperature
protection for your valuable test items.
IEEE-488 Computer Interface
A parallel interface can be provided for interface with IEEE-488
parallel instrument control buss. A standard IEEE-488 connector
is provided for easy connection to adjacent test equipment.
Chart Recorders
A selection of one or two pen chart recorders are available
with a variety of pre-printed charts or self printing thermal
charts.
Running Time Meter
The optional run time meter includes a non-resettable display
which will accumulate the system running time for routine
maintenance and planning purposes.
Main Power Disconnect
Provides an additional level of safety by shutting down the
main power to the chamber prior to maintenance or repair.
Performance & Refrigeration Options
Dry Air Purge System
A dry air purge system can be provided to reduce condensation
within the chamber and on the test item during temperature
cycling testing. This option is primarily used to prevent
short circuits in electronic components and is also used for
low humidity requirements.
Humidity Options
Spare Water Demineralizer Cartridges
Additional demineralizer cartridges are available for overnight
delivery. Cartridges will turn orange-brown when used and
are easily replaceable.
|