Tensile Test Chamber
 CSZ’s
Tensile test chamber is an environmental chamber that interfaces
with a customer tensile tester load frame. This chamber is
required to expose various materials and components to temperature
conditions while undergoing tensile test. Tensile testing
stresses materials by pushing, pulling, twisting, or bending
intended for static and fatigue testing.
Chambers are designed to accommodate the internal and external
size restrictions to properly interface with the load frame
along with custom-sized ports at the top and bottom of the
environmental chamber for the actuator piston to penetrate
through. These chambers are built for easy removal from the
load frame.
Temperature Range: -34°C to 100°C
Special Features
- Chamber is designed to minimize the amount of electrical
and mechanical components on the top and the bottom of the
chamber.
- Two door handles are installed to allow for easy removal
of the door.
- An insulated split circular port was used in the top
and bottom of the chamber to interface with the user’s
load frame and actuator.
- Eyebolts are included to facilitate removal of the chamber
from the load frame.
|
