Custom Built
Environmental Chambers
 Do
your test applications require a special mechanical
interface,
modification of a standard environmental
test chamber, or a unique and special
requirement? Then,
consider a custom unit from CSZ!
Our top flight engineering and design team can
create custom
solutions for your highly specialized requirements.
From chambers
for the smallest computer chip to huge rocket
engines, and
everything in between, CSZ has the know-how to make
your needs
our successes. Cincinnati Sub-Zero has custom
designed thousands
of environmental test chambers for special
applications. We
can custom design the right environmental testing
system for
you!
Review some of our custom
applications:
Accelerated Stress Test Chambers
Chambers are designed for fast product temperature
change
rates. These chambers are typically designed to
cycle between
70°C to -20°C at a rate up to 30°C per
minute
based upon the part temperature. These test
chambers are also
referred to as Environmental Stress Screening
Chambers, HALT
or HAST test chambers.
Liquid
Calibration Baths
Designed for calibration of temperature control
devices that
contain hazardous or corrosive fluids. Meets Class
1, Division
1 requirements for operation in a hazardous
environment.
Environmental
Conditioning Unit
This custom-designed unit is made to act as a
temperature
and humidity control device integrated with, and
enclosed
inside of a printing press.
Freeze
Thaw Environmental Chambers
Concrete samples are soaked in water, frozen, and
thawed to
determine the structural integrity of the concrete.
Primarily
used to meet DOT ASTM specifications. Also utilized
in other
applications.
Fuel
Tank Test Chamber
With four, custom-sized access doors, this walk-in
test chamber
is combined with a liquid chilling system and a
storage tank
that are cooled by one refrigeration system for
testing multiple
fuel tanks.
Liquid Baths & Multi-Liquid Baths
Provide many constant temperature
environments in
a single unit.
Process Gas Condenser
Extracts usable or non-desired substances out of
gas stream
by condensing to a liquid.
Rain/Ice Test Chamber
Provides an environment to test insulating values
and weight
support of a product that may be used in an outdoor
environment
with rain and ice.
Sand and Dust Test Chambers
Provides an environment to test the exposure of
automotive
and electronic components to concentrated levels of
dust in
order to validate the seal integrity of a
product.
Solar Panel Testing Chamber
Test chambers for testing various size photovoltaic modules and solar panel testing. These chambers are designed for temperature and humidity cycling along with the ability to meet the humidity freeze test and aspects of test standard IEC 61646.
Tensile Test Chamber
These test chambers expose materials to temperature
and/or
humidity environments while interfacing with a
variety of
destructive and nondestructive test equipment.
Wire
Tester
These chambers are used for stressing materials
used in the
manufacturing of wire coatings and hoses. Cold bend
specifications
require exposure and bending of material.
Other Custom-Designed Environmental
Testing
Chambers
Temperature cycling units may be designed to
interface with
your equipment. For example, automated conveyors for
use in
the manufacturing process.
Test Stand & Fixtures
Custom product test stands and fixtures,
such as
product racks and slide-out shelves, are designed
for optimum
airflow around your product and can be manufactured
for literally
any environment.
Ultra High Temperatures
High temperature chambers (up to 1000°F),
requiring special
construction and attention to detail are possible
at CSZ.
Ultra Low Temperatures
Temperatures of -120°F are standard
with mechanical
cascade refrigeration and -300°F is attainable
with LN2.
Explosion-Proof Test Chambers
CSZ can provide a full range of explosion-proof
chambers to
qualify for Class I or II, Group D, Div. I.
|
